EN
EN CN
Register/Login
X-Ray
High-resolution CMOS image sensors with excellent spectral and color response can be used as X-ray and particle beam detection. Compared with the traditional film-based dental X-ray system, CMOS based systems reduce the X-ray dose borne by patients. In addition, the captured images can be displayed immediately and the contrast and size can be adjusted as needed. The Gpixel GSENSE product line uses a proprietary Pulsar technology to deliver spectral response in the X-ray wavelength.
Recommended Products
GSENSE4040BSI
The GSENSE400BSI sensor is a 4 Megapixels resolution BSI CMOS image sensor with 11μm pixel size. As the first backside illuminated scientific CMOS image sensor in the world, GSENSE400BSI features low readout noise of 1.6e¯, high dynamic range of 94dB, and low dark current of 0.27e¯/s/pix at deep cooling of -40℃. With special ARC, the sensor provides peak of 95% @ 570nm. This image sensor has two operation modes, STD mode in 48 fps or HDR mode which is optimized for high dynamic range (HDR) applications with half frame rate. In HDR mode, the sensor achieves a linear dynamic range of 95dB. These features make GSENSE400BSI ideal for high-end scientific imaging, corona detection, astronomy, spectroscopic, and forensic imaging applications.
GSENSE4040
GSENSE4040 is a 16.8Mega pixel resolution CMOS image sensor. Featured with five transistor (5T) HDR pixel design on a 9 μm pitch, the sensor could achieve 3.7 e‾ dark noise and 74.2 ke‾ FWC simultaneously in HDR mode. GSENSE4040’s maximum frame rate (will full resolution) is 24 fps in HDR mode. It supports 2 x 2 charge binning mode in which x 4 frame rate is achieved. These features make GSENSE4040 an ideal image sensor for various applications. GSENSE4040 is offered in two variations: CMN and CMT. CMN is a monochrome sensor without microlens array and protected by a removable glass lid, which is ideal for X-ray imaging, charged particle detection, and micro-CT application; while CMT is a monochrome sensor with microlens array and sealed with D263®T lids with anti-reflective coating on both sides, ideal for medical imaging and astronomy applications.
GSENSE6060
GSENSE6060, and its pin-compatible back-thinned version GSENSE6060BSI, are designed with a large imaging area for demanding astronomical and scientific imaging applications. With its top and bottom readout chains consisting of 2×25 LVDS pairs running up to 630MHz, GSENSE6060’s frame rate is up to 44 fps with 12bit ADC, allowing scientists to observe with the never-achieved temporal resolution of large format imagers. The two readout chains also provide the possibility for HDR combination up to 89dB. GSENSE6060 supports up to 4 times correlated multiple sampling (CMS). In CMS mode, both the reset and signal levels of pixel output are sampled for multiple times and summed up for pixel-related noise suppression. The Aluminum Nitride package of GSENSE6060 provides 10x thermal conductivity than the traditional Alumina package, as well as excellent flatness both at the room temperature and deep-cooled temperatures.
GSENSE6060BSI
GSENSE6060BSI is designed with a large imaging area for demanding astronomical and scientific imaging applications. With its top and bottom readout chains consisting of 2×25 LVDS pairs running up to 420 MHz, GSENSE6060BSI’s frame rate is up to 26 fps with 12bit ADC, allowing scientists to observe with the never-achieved temporal resolution of large format imagers. The two readout chains also provide the possibility for HDR combination up to 90 dB. GSENSE6060BSI supports up to 4 times correlated multiple sampling (CMS). In CMS mode, the reset and pixel output are sampled for multiple times and summed up for pixel-related noise suppression. The Aluminum Nitride package of GSENSE6060BSI provides 10x thermal conductivity than the traditional Alumina package, as well as excellent flatness both at the room temperature and deep-cooled temperatures. GSENSE6060BSI is equipped with removable glass lids.
GSENSE400BSI
The GSENSE400BSI sensor is a 4 Megapixels resolution BSI CMOS image sensor with 11μm pixel size. As the first backside illuminated scientific CMOS image sensor in the world, GSENSE400BSI features low readout noise of 1.6e‾ , high dynamic range of 94dB, and low dark current of 0.27e‾ /s/pix at deep cooling of -40℃. With special ARC, the sensor provides peak of 95% @ 570nm. This image sensor has two operation modes, STD mode in 48 fps or HDR mode which is optimized for high dynamic range (HDR) applications with half frame rate. In HDR mode, the sensor achieves a linear dynamic range of 95dB. These features make GSENSE400BSI ideal for high-end scientific imaging, corona detection, astronomy, spectroscopic, and forensic imaging applications.
GSENSE400
The GSENSE400 is a 4 Megapixels resolution CMOS image sensor using 11μm pitch high dynamic range pixel. The sensor operates in electronic rolling shutter and features an extremely low temporal noise of 1.5 e‾ The sensor peak QE is around 58% without μlens. High sensitivity combining the very low noise and low dark current makes it perfect for scientific applications. This image sensor has two operation modes, STD mode in 48 fps or HDR mode which is optimized for high dynamic range (HDR) applications with half frame rate. In HDR mode, the sensor achieves a linear dynamic range of more than 95.6 dB. GSENSE400 integrates a 12bit ADC, a temperature sensor, a PLL and SPI control on-chip. The power consumption of the image sensor running at full speed is less than 600mW.
关注微信公众号
Copyright © 2024 Gpixel Microelectronics Inc. All rights reserved Legal Notices Cookies Policy Privacy Policy Site Map
0