GMAX4002 is a 1/1.7" optical format image sensor with 2048 x 1200 effective pixels. Featuring an advanced charge domain global shutter pixel, GMAX4002 operates with true CDS for low noise and high dynamic range. Gpixel’s Red Fox technology is employed to deliver enhanced QE for NIR applications. GMAX4002 is configurable through I2C. It integrates both Sub-LVDS and MIPI interfaces, for frame rates of 344 fps and 166 fps respectively. GMAX4002 supports 2×2 on-chip binning to achieve higher sensitivity and faster frame rate. It includes an on-chip sequencer and OTP functions.Assembled with 74-pin CLCC package, GMAX4002 enables a cost-effective camera solution, easy integration and high-reliability mass production.

GL0402 is a 4096 x 2 resolution, 7 μm square pixel, global shutter linear image sensor that supports maximum 200 kHz line rate in single line mode and 100 kHz line rate in dual line mode. GL0402 offers low read noise of less than 5.2 e¯and 10 ke¯ FWC, leads to 65.6 dB intra-scene dynamic range. GL0402 uses external clock and all required timing are generated by on chip sequencer, reducing the amount of external component needed; output channel multiplexing function enables flexibility on FPGA choice, suitable for cost-effective camera solution for demanding on line inspection applications. GL0402 is assembled with compact 76 pins CLCC package for fast heat dissipation and high robustness.

GMAX2518 has an optical format of 1" and features 18 MP (4508 × 4096) Global Shutter pixels based on the proven GMAX 2.5 μm architecture, operating with true correlated double sampling (CDS) for low read noise and high dynamic range. In addition, the dual light pipe technology provides excellent PLS and angular response, with 32 pairs of sub-LVDS each run at 960 MHz, the sensor output with maximum 30.72 Gbps data, achieving maximum frame rate of 139 fps in 10 bit output and 64 fps in 12 bit output. The sensor integrates an on-chip sequencer, programmable through SPI, and is designed to be fully pin compatible with GMAX0505, GMAX2509 and GMAX2505 to significantly shorten time to market for camera manufactures. GMAX2518 is assembled in a 19.5 x 20.8 mm 226-pins LGA ceramic package, which is mechanically compatible to fit into an industry standard 29 mm x 29 mm camera housing.

Designed for high speed industrial inspection, GL0816 is a line scan CMOS image sensor which consists of 16 lines of 8322 pixels with 5 μm pixel size and 5 μm inter-line space. It supports dual line, 4-line readout and max 8-line with 2-stage on-chip TDI. The maximum line rate of GL0816 is 200 kHz @ 11bit dual-line mode and 100 kHz @ 10bit 4-line mode. GL0816 is manufactured with Mono or RGBW 4-band CFA which is customized with extremely low color crosstalk to enable accurate image reproduction.

GMAX2505 achieves more than 65% peak QE and excellent angular response. Thanks to the latest light pipe technology, more than -80dB shutter efficiency can be achieved. The sensor supports both 10bit and 12bit output, with frame rate up to 290fps and 121fps. It is assembled in a ceramic Land Grid Array (LGA) package, allowing easy integration and mass production. GMAX2505 is pin-compatible with GMAX0505, GMAX2509 and GMAX2518, where GMAX0505 is a 25MP (5120x5120) 1.1" sensor, GMAX2509 is a 9MP (4200x2160) 2/3" sensor, and GMAX2518 is a 18MP (4508x4096) 1" sensor. All four sensors are designed with the same 2.5μm global shutter pixel architecture and same sequencer operation, allowing reduced system costs and R&D cost for customers.

GMAX2509 achieves more than 65% peak QE and excellent angular response. Thanks to the latest light pipe technology, more than -80dB shutter efficiency can be achieved. The sensor supports both 10bit and 12bit output, with frame rate up to 290fps and 121fps. It is assembled in a ceramic Land Grid Array (LGA) package, allowing easy integration and mass production. GMAX2509 is pin-compatible with GMAX0505, GMAX2505 and GMAX2518, where GMAX0505 is a 25MP (5120×5120) 1.1" sensor, GMAX2505 is a 5MP (2600×2160) 1/2" sensor, and GMAX2518 is a 18MP (4508×4096) 1" sensor. All four sensors are designed with the same 2.5μm global shutter pixel architecture and same sequencer operation, allowing reduced system costs and R&D cost for customers.

GMAX0505, designed with the world’s smallest 2.5μm charge domain global shutter pixel, offers the highest resolution of 25 Megapixels within 1.1" optical format. Despite its small pixel pitch, GMAX0505 achieves more than 65% peak QE and excellent angular response thanks to the latest light pipe technology. In addition, with optimized tungsten shielding structure on top of the pixel’s memory node, the sensor’s shutter efficiency is more than 80dB. GMAX0505 supports 10bit and 12bit output, and the frame rate is up to 150fps. The sensor is assembled in a ceramic Land Grid Array (LGA) package, allowing easy integration and mass production. The superior performance and the cost-effective packaging of GMAX0505 offer camera manufactures great advantage over various applications, including machine vision, high resolution industrial inspection, ITS and surveillance. GMAX0505RF is processed with Red Fox Technology for NIR sensitivity enhancement. GMAX0505 is pin-compatible with GMAX2505, GMAX2509 and GMAX2518, where GMAX2505 is a 5MP (2600×2160) 1/2" sensor, GMAX2509 is a 9MP (4200×2160) 2/3" sensor, and GMAX2518 is a 18MP (4508×4096) 1" sensor. All four sensors are designed with the same 2.5μm global shutter pixel architecture and same sequencer operation, allowing reduced system costs and R&D cost for customers.