EN
EN CN
Register/Login
Microluminescence Imaging
Low light imaging refers to the use of the high sensitivity of the sensor itself to perceive the weak light in the environment to achieve night observation suitable for the naked eye. The core factors of low-light night vision imaging are low noise, large pixels and high sensitivity. The Gpixel GSENSE and GLUX product lines deliver the specifications critical to this application.
Scientific Research Surveillance
Recommended Products
GLUX1605BSI
GLUX1605BSI is a 0.5 Megapixel resolution BSI CMOS image sensor with 16μm x 16μm pixel size. The sensor operates in electronic rolling shutter in two operation modes: low noise mode, and HDR mode. User can choose which to operate in camera based on practical application’s requirement on full well capacity, noise, dynamic range, etc. It integrates two types of output channels(sub-LVDS and MIPI) and on-chip sequencer, which enables the sensor development less effort and hardware resource. GLUX1605BSI is pin compatible with GLUX9701BSI (1inch SXGA of GLUX image sensor family), users can operate both sensors with one set of PCB design.
GLUX9701BSI
GLUX9701BSI, a 1" sized, high sensitivity BSI sCMOS image sensor with a resolution of 1.3 MP (1280 x 1024) and large 9.76 μm x 9.76 μm pixels. Sensor supports a dual-gain HDR mode, achieving dynamic range of 89.5 dB by combining 1.6 e¯ readout noise. A dedicated low noise mode further optimizes imaging performance with read noise of 0.85 e- and power consumption of only 122 mW.
GSENSE4040BSI
GSENSE4040BSI is a BSI CMOS image sensor of 16.8MP (4096 x 4096) resolution with 9 μm × 9 μm pixel size, and a photosensitive area of 36.8 mm x 36.8 mm (52 mm diagonal). Using dual gain HDR operation mode, 84.6 dB is achieved with 39.2k e¯ full well capacity and 2.3 e¯ readout noise. 18 pairs of LVDS channels running at 600 MHz per channel support full-resolution imaging at a frame rate of 24 fps. GSENSE4040BSI is assembled in 140-pin PGA ceramic package with a removable glass lid. This sensor is pin compatible with GSENSE4040FSI for fast and easy integration
GSENSE6060BSI
GSENSE6060BSI is designed with a large imaging area for demanding astronomical and scientific imaging applications. With its top and bottom readout chains consisting of 2×25 LVDS pairs running up to 420 MHz, GSENSE6060BSI’s frame rate is up to 26 fps with 12bit ADC, allowing scientists to observe with the never-achieved temporal resolution of large format imagers. The two readout chains also provide the possibility for HDR combination up to 90 dB. GSENSE6060BSI supports up to 4 times correlated multiple sampling (CMS). In CMS mode, the reset and pixel output are sampled for multiple times and summed up for pixel-related noise suppression. The Aluminum Nitride package of GSENSE6060BSI provides 10x thermal conductivity than the traditional Alumina package, as well as excellent flatness both at the room temperature and deep-cooled temperatures. GSENSE6060BSI is equipped with removable glass lids.
GSENSE400BSI
The GSENSE400BSI is a high-performance 2k x 2k image sensor designed for the most demanding scientific applications. It’s generous 11 μm rolling shutter pixel combined with the sensor’s dual gain HDR functionality deliver over 94 dB of dynamic range while maintaining a frame rate of 24 fps. If higher frame rates are required, 48 fps can be sustained in standard imaging mode with a dynamic range of 65 dB. The sensor’s exceptional sensitivity is due to its 1.3 e¯ read noise floor, low dark current, and backside thinning technology with peak QE of 95%. The 12bit data is delivered over 8 pairs of LVDS outputs and the total power consumption is below 650 mW. The sensor is packaged in a 115-pin PGA with removable cover glass for easy integration into cooled camera systems. The 22.5 mm x 22.5 mm square active imaging area is ideally sized for microscopy applications. Whether used to capture long exposures of faraway nebulae or for high-throughput imaging of biological samples, the GSENSE400BSI is the scientific industry’s high-performance imaging workhorse.
GSENSE2020BSI
GSENSE2020BSI is a backside illuminated (BSI) scientific CMOS image sensor, with 4MP resolution and 6.5 μm pixel size. With six-transistor (6T) pixel architecture, GSENSE2020BSI features readout noise of 1.6 e¯, full well of 55 ke¯, as well as peak QE of 95%. In addition, the sensor supports correlated multiple sampling (CMS), the read noise can be further reduced to 1.2 e¯ with 2-CMS operation. GSENSE2020BSI’s max. frame rate is 74 fps with 11bit HDR mode. The frame rate, as well as the global reset function, make GSENSE2020BSI the best solution for industrial inspection requiring superior UV sensitivity. In addition, GSENSE2020BSI is pin-compatible with GSENSE2020 and GSENSE2011, allowing easy hardware integration with minimized development, and fast time-to-market.
关注微信公众号
Copyright © 2024 Gpixel Microelectronics Inc. All rights reserved Legal Notices Cookies Policy Privacy Policy Site Map
0